;-=====================================================-
; Configuration file for mugen.exe
;-=====================================================-

;-------------------------------------------------------
; Game options configurable in M.U.G.E.N's options screen go here.
; Does not include key config.
[Options]
; Basic options
Difficulty = 8
Life = 100
Time = None
GameSpeed = 0
WavVolume = 50
MidiVolume = 50

; Team-only config
Team.1VS2Life = 150
Team.LoseOnKO = 0

; Not accessible in options screen
motif = data/system.def
;MP3Volume = 50 ;Not yet implemented

;-------------------------------------------------------
[Rules]
;Keep this set at VS. It's the only option supported for now.
GameType = VS

;This is the amount of power the attacker gets when an attack successfully
;hits the opponent. It's a multiplier of the damage done. For example,
;for a value of 3, a hit that does 10 damage will give 30 power.
Default.Attack.LifeToPowerMul = .7

;This is like the above, but it's for the person getting hit.
;These two multipliers can be overridden in the Hitdef controller in the
;CNS by using the "getpower" and "givepower" options.
Default.GetHit.LifeToPowerMul = .6

;This controls how much damage a super does when you combo into it.
;It's actually a multiplier for the defensive power of the opponent.
;A large number means the opponent takes less damage. Leave it at
;1 if you want supers to do the normal amount of damage when comboed
;into.
;Note 1: this increase in defence stays effective until the opponent
; gets up from the ground.
;Note 2: the program knows you've done a super when the "superpause"
; controller is executed. That's the instance when this change
; becomes effective.
Super.TargetDefenceMul = 1.5



;-------------------------------------------------------
[Config]
;Set the game speed here. The default is 60 frames per second. The
;larger the number, the faster it goes. Don't use a value less than 10.
GameSpeed = 60

;Set to 1 to draw shadows (default). Set to 0 if you have a slow
;machine, and want to improve speed by not drawing shadows.
DrawShadows = 1

;Number of simultaneous afterimage effects allowed.
;Set to a lower number to save memory (minimum 1).
AfterImageMax = 8

;Maximum number of layered sprites that can be drawn.
;Set to a lower number to save memory (minimum 32).
LayeredSpriteMax = 128

;Maximum number of explods allowed in total. Note that hitsparks
;also count as explods.
;Set to a lower number to save memory (minimum .
ExplodMax = 64

;Maximum number of system explods allowed.
;Set to a lower number to save memory (minimum .
SysExplodMax = 48

;Maximum number of helpers allowed in total.
;Set to a lower number to save memory (minimum 4, maximum 56).
HelperMax = 32

;Maximum number of projectiles allowed per player.
;Set to a lower number to save memory (minimum 5).
PlayerProjectileMax = 50

;This is 1 the first time you run MUGEN.
FirstRun = 0


;-------------------------------------------------------
[Debug]
;Set to 0 to disable starting in debug mode by default.
Debug = 0

;Set to 0 to disallow switching to debug mode by pressing Ctrl-D.
;If Debug = 1, this will be ignored.
AllowDebugMode = 1

;Set to 1 to allow debug keys at all times. Otherwise debug keys
;allowed only in debug mode.
AllowDebugKeys = 0

;Set to 1 to run at maximum speed by default.
Speedup = 0

;Default starting stage for quick versus.
StartStage = stages/stage0.def


;-------------------------------------------------------
[Video Win]
;Enter the width and height of the resolution you want to set here.
;The optimal resolution is 320x240, but if your video card has problems
;You may want to try 640x480.
Width = 640
Height = 480

;This is the color depth at which to run MUGEN. You should set it to
;16 bit color unless your video card has problems with it.
;16-fastest, 24,32-slower, 8-slowest/worst
Depth = 16

;Set this parameter to 0 to disable screen stretching, and set it to 1 if
;you want to scale it up to fit the current resolution.
Stretch = 0

;DirectX mode
;Choose from Hardware, Software, Windowed, Overlay, Safe and None
;Hardware and Software run in full-screen. Windowed and Overlay
;run in a window. The windowed modes require you to set Depth to
;whatever color depth you are using for you desktop. The best results
;are when you run in 16-bit color. There is no advantage to running
;in 32-bit color. If Hardware, Software and Windowed fail, try Safe.
;None uses GDI to draw, so it's very slow. Use None only if
;you cannot get anything else to work.
;Overlay is not supported by all video cards, but can be faster than
;Windowed if it works.
DXmode = Windowed

;Set to 1 to enable vertical retrace synchronization. Do not enable
;if BlitMode = PageFlip.
VRetrace = 0

;Drawing mode
;Choose from Normal and PageFlip
BlitMode = PageFlip

;-------------------------------------------------------
[Video Linux]
;Enter the width and height of the resolution you want to set here.
;The optimal resolution is 320x240, but if your video card has problems
;You may want to try 640x480.
Width = 320
Height = 240

;This is the color depth at which to run MUGEN. You should set it to
;16 bit color unless your video card has problems with it.
;16-fastest, 24,32-slower, 8-slowest/worst
Depth = 16

;Set this parameter to 0 to disable screen stretching, and set it to 1 if
;you want to scale it up to fit the current resolution.
Stretch = 1

;Set to 1 to enable vertical retrace synchronization. Do not enable
;if BlitMode = PageFlip.
VRetrace = 0

;Set to 1 to enable fullscreen mode, 0 for windowed.
FullScreen = 0

;Drawing mode
;Choose from Normal and PageFlip
BlitMode = PageFlip

;-------------------------------------------------------
; Sound configuration (Windows)
; Note: WavVolume and MidiVolume here are not the same
; as the ones in [Options], but they all affect the volume.
[Sound Win]
;Set the following to 1 to enable sound effects and music.
;Set to 0 to disable.
Sound = 1

;Set the following to 1 to enable stereo effects in-game
;Set to 0 to disable.
StereoEffects = 1

;This is the width of the sound panning field. If you
;Increase this number, the stereo effects will sound
;closer to the middle. Set to a smaller number to get
;more stereo separation on sound effects.
;Only valid if StereoEffects is set to 1.
PanningWidth = 240

;Set the following to 1 to reverse left and right channels
;on your sound card.
ReverseStereo = 0

;Wave device to use. Choose from:
; NONE - No wave device
; AUTO - Autodetect
; DX? - DirectSound: replace ? with a the device number (from 0 to 9)
; DXA? - DirectSound with Allegro mixer: replace ? with a the device number (from 0 to 9)
; WAVEOUTA- High-quality wave-out
; WAVEOUTB- Low-quality wave-out
WavDevice = AUTO

;Voice Channels to use. Values are from 1 to 16.
;If sound quality is poor, try setting a smaller number, such as 8 or 4.
WavChannels = 12

;Maximum number of voices used for MODs. This number reduces the
;number of available WavChannels. ModVoices must be less than
;WavChannels. If equal, then MODs will get all the available
;channels and therefore no sound effects will play.
ModVoices = 6

;Midi device to use. Choose from:
; NONE - No midi device
; AUTO - Autodetect
; MAPPER - MIDI Mapper
; MID? - MIDI Device: replace ? with a the device number (from 0 to 9)
; DIGMID - Allegro's Digimid driver
MidiDevice = AUTO

;This is the master volume for all wav sounds (affects mp3 volume).
;Valid values are from from 0 to 255.
MasterWavVolume = 255

;Set the volume of wav, midi, mods and CD audio.
;Note: WavVolume does not affect mp3 or mod volume.
;Valid values are from from 0 to 255.
;For CDAVolume only, using -1 will leave the volume unchanged.
WavVolume = 135
MidiVolume = 135
MP3Volume = 135 ;This affects all Winamp-compatible plugins as well
ModVolume = 135
CDAVolume = -1

;Set the following to 1 to enable and 0 to disable MIDI, MP3, MOD and CD
;playback.
PlayMIDI = 1
PlayMP3 = 1 ;This affects all Winamp-compatible plugins as well
PlayMOD = 1
PlayCDA = 1

;Set the drive letter of your CD-ROM (if you have more than one
;drive). eg, To use drive E, put the following:
; CDADevice = E:\
;Leave blank to use your default CD-ROM drive.
CDADevice =

;Set the following to 1 to pause BGM playback when switching
;away from the MUGEN window.
PauseBGMOnDefocus = 1

;List Winamp-compatible plugins here.
;Specify the filename of the plugin and the list of file types to
;use the plugin for. One plugin per line.
;Example: plugin = plugins/my_plugin.dll, mp3, mp2, mpg
;
;If music is not looping with a particular plugin, you can try an
;optional first argument looptype=1 (seek to zero; may stutter)
;or looptype=2 (reload plugin; slow).
;Example: plugin = plugins/in_mad.dll, mp3, mp2, mpg,
plugin =looptype=2, plugins/in_mp3.dll, mp3, mp2, mpg
plugin = looptype=2, plugins/in_vorbis.dll, ogg
plugin = looptype=1, plugins/in_midi.dll, mid
plugin = plugins/in_mpc.dll, mpc
plugin = plugins/in_adx.dll, adx

;-------------------------------------------------------
; Sound configuration
; Note: WavVolume and MidiVolume here are not the same
; as the ones in [Options], but they all affect the volume.
[Sound Linux]
;Set the following to 1 to enable sound effects and music.
;Set to 0 to disable.
Sound = 1

;Set the following to 1 to enable stereo effects in-game
;Set to 0 to disable.
StereoEffects = 1

;This is the width of the sound panning field. If you
;Increase this number, the stereo effects will sound
;closer to the middle. Set to a smaller number to get
;more stereo separation on sound effects.
;Only valid if StereoEffects is set to 1.
PanningWidth = 240

;Set the following to 1 to reverse left and right channels
;on your sound card.
ReverseStereo = 0

;Wave device to use. Choose from:
; NONE - No wave device
; AUTO - Autodetect
; OSS - Open Sound System
; ESD - Enlightened Sound Daemon
; ALSA - ALSA sound driver
WavDevice = AUTO

;Voice Channels to use. Values are from 1 to 16.
;If sound quality is poor, try setting a smaller number, such as 8 or 4.
WavChannels = 12

;Maximum number of voices used for MODs. This number reduces the
;number of available WavChannels. ModVoices must be less than
;WavChannels. If equal, then MODs will get all the available
;channels and therefore no sound effects will play.
ModVoices = 6

;Midi device to use. Choose from:
; NONE - No midi device
; AUTO - Autodetect
; OSS - Open Sound System
; ALSA - ALSA sound driver
; DIGMID - Allegro's Digimid driver
MidiDevice = OSS

;This is the master volume for all wav sounds (affects mp3 volume).
;Valid values are from from 0 to 255.
MasterWavVolume = 255

;Set the volume of wav, midi, mods and CD audio.
;Note: WavVolume does not affect mp3 or mod volume.
;Valid values are from from 0 to 255.
;For CDAVolume only, using -1 will leave the volume unchanged.
WavVolume = 128
MidiVolume = 128
MP3Volume = 135
ModVolume = 80
CDAVolume = -1

;Set the following to 1 to enable and 0 to disable MIDI, MP3, MOD and CD
;playback.
Playmidi = 1
Playmp3 = 1
Playmod = 1
PlayCDA = 1

;Set the drive letter of your CD-ROM (if you have more than one
;drive). eg, To use drive E, put the following:
; CDADevice = E:\
;Leave blank to use your default CD-ROM drive.
CDADevice =


;-------------------------------------------------------
[Misc]
;Number of extra players to cache in memory.
;Set to a lower number to decrease memory usage, at cost of
;more frequent loading.
PlayerCache = 1

;Set to 1 to allow precaching. Precaching attempts to start loading
;player data as early as possible, to reduce apparent loading times
;between matches. To get the best performance, set PlayerCache to at
;least 1. The optimal number for PlayerCache is 4 when precaching is
;enabled. Precaching is not available in DOS.
Precache = 1

;Set to 1 to enable large-buffer reads of sprite and sound data.
;Set to 0 (off) to decrease memory usage, at cost of slower
;loading.
BufferedRead = 1

;Set to 1 to free system.def data from memory whenever possible.
;This decreases memory usage, in exchange for loading time
;before system screens.
UnloadSystem = 1

;Set to 1 to pause MUGEN when the MUGEN window loses focus (will also
;pause BGM regardless of the PauseBGMOnDefocus setting).
;Leave at 0 to let MUGEN run in the background.
;Regardless of this setting, MUGEN will always pause on defocus if
;it is running fullscreen.
PauseOnDefocus = 1


;-------------------------------------------------------
[Arcade]
;Set to 0 for computer to choose color 1 if possible.
;Set to 1 for computer to randomly choose a color.
AI.RandomColor = 1

;This option allows the AI to input commands without
;having to actually press any keys (in effect, cheating)
;Set to 1 to enable, 0 to disable. Enabling this option
;can give the illusion of a smarter AI.
AI.Cheat = 1

;Arcade Mode AI ramping. For both parameters below, the first number
;corresponds to the number of matches won, and the second number to the
;AI difficulty offset. The actual difficulty is the sum of the AI
;difficulty level (set in the options menu) and the value of the offset
;at a particular match.
; AIramp.start = start_match, start_diff
; AIramp.end = end_match, end_diff
;The difficulty offset function is a constant value of start_diff from
;the first match until start_match matches have been won. From then the
;offset value increases linearly from start_diff to end_diff. After
;end_diff matches have been won, the offset value is end_diff.
; e_d /----------
; /
; s_d _______/
; ^ ^ ^ ^
; 1st_m s_m e_m last_m
;For example, if you have:
; AIramp.start = 2,0
; AIramp.end = 4,2
;For 6 matches at level 4, the difficulty will be (by match):
; 4,4,4,5,6,6
arcade.AIramp.start = 2, 0
arcade.AIramp.end = 4, 2

;Team Mode AI ramping
team.AIramp.start = 1, 0
team.AIramp.end = 3, 2

;Survival Mode AI ramping
survival.AIramp.start = 0, -3
survival.AIramp.end = 16, 4


;-------------------------------------------------------
[Input]
P1.UseKeyboard = 1
P2.UseKeyboard = 1
;Joystick type:
;0 - Disable
;1 - Autodetect (not reliable under DOS)
;4 - 4 button
;6 - 6 button
;8 - 8 button
;20 - Sidewinder
;21 - SNESKey
;22 - PSX pad
;23 - N64 pad
P1.Joystick.type = 0
P2.Joystick.type = 0
ForceFeedback = 0 ;True to enable force feedback (DOS only)

;-------------------------------------------------------
; P1 Key config (configurable from M.U.G.E.N)
[P1 Keys]
Jump = 72
Crouch = 80
Left = 75
Right = 77
A = 31
B = 30
C = 17
X = 44
Y = 45
Z = 16
Start = 21

; P2 Key config (configurable from M.U.G.E.N)
[P2 Keys]
Jump = 72
Crouch = 80
Left = 75
Right = 77
A = 74
B = 78
C = 156
X = 69
Y = 181
Z = 55
Start = 81

[P1 Joystick] ;Default config
Jump = 1
Crouch = 2
Left = 3
Right = 4
A = 5
B = 6
C = 9
X = 7
Y = 8
Z = 10
Start = 13

[P2 Joystick] ;Default config
Jump = 1
Crouch = 2
Left = 3
Right = 4
A = 5
B = 6
C = 9
X = 7
Y = 8
Z = 10
Start = 13

[P1 Joystick Win] ;Default config for win
Jump = 1
Crouch = 2
Left = 3
Right = 4
A = 7
B = 8
C = 10
X = 6
Y = 5
Z = 9
Start = 14

[P2 Joystick Win] ;Default config for win
Jump = 33
Crouch = 34
Left = 35
Right = 36
A = 39
B = 40
C = 0
X = 37
Y = 38
Z = 0
Start = 0

; Definitions of system screens

; *** DO NOT MODIFY OR OVERWRITE THIS FILE ***
; To customize, make a copy of this file in a subdirectory of your
; motif's name. See readme.txt for details on motifs.

; *2001.11.14 NEW* symbolizes any new functionality added for the 2001.11.14
; version of M.U.G.E.N.

; Notes about fonts:
; - do not index fonts greater than 9 (crash)
; - fonts indexed here do not refer to the ones in fight.def

;----------------------------
[Info]
name = "Default Plus" ;Name of motif
author = "" ;Motif author name

;----------------------------
;Directories are checked in this order:
;1. current directory system.def is in
;2. data/
;3. your MUGEN directory
;eg. If you write "spr = system.sff", and this system.def file
; is in ~/mugen/data/mymotif/, then Mugen will first look
; for ~/mugen/data/mymotif/system.sff. If it does not find
; it there, it looks for ~/mugen/data/system.sff (the default).
; Finally, if that is not found, it will look for
; ~/mugen/system.sff.

[Files]
spr = system.sff ;Filename of sprite data
snd = system.snd ;Filename of sound data
logo.storyboard = ;Logo storyboard definition (optional)
intro.storyboard = ;Intro storyboard definition (optional)
select = select.def ;Character and stage selection list
fight = fight.def ;Fight definition filename
font1 = font/f-4x6.fnt ;System fonts
font2 = font/f-6x9.fnt ;System fonts
font3 = font/jg.fnt ;System fonts

;----------------------------
[Music]
;Put a filename for a mod, mp3 or midi here, or just leave it
;blank if you do not want music. If an invalid filename is
;given, then no music will play. To play CD audio, put
;the track number followed by ".da". For example, to play
;track 3 from a music CD at the title screen, use:
; title.bgm = sound/3.da
;To play mymusic.mp3 from the sound/ directory, put:
; title.bgm =
;Music will continue to play between screens if the files names
;are the same, and both BGMs are specified to loop.
;Music to play at title screen.
title.bgm = sound/title.mp3
title.bgm.loop = 1 ;Set to 0 to prevent looping
;Music to play at char select screen.
select.bgm =
select.bgm.loop = 1
;Music to play at versus screen.
vs.bgm =
vs.bgm.loop = 1

;-------------------------------------------------------------------
;Title screen definition
[Title Info]
fadein.time = 10
fadeout.time = 10
menu.pos = 159,158
menu.item.font = 3,0,0
menu.item.active.font = 3,5,0
menu.item.spacing = 0, 13
; Names for each of the items in the menu. Names must be in quotes.
; Use "" to disable an item. If all are disabled, goes straight to demo mode
; (hold Esc to quit demos). *2001.11.14 NEW*
menu.itemname.arcade = "ARCADE"
menu.itemname.versus = "VS MODE"
menu.itemname.teamarcade = "TEAM ARCADE"
menu.itemname.teamversus = "TEAM VS"
menu.itemname.teamcoop = "TEAM CO-OP"
menu.itemname.survival = "SURVIVAL"
menu.itemname.survivalcoop = "SURVIVAL CO-OP"
menu.itemname.training = "ENTRENAR"
menu.itemname.watch = "VER"
menu.itemname.options = "OPCIONES"
menu.itemname.exit = "SALIR"
; These parameters define the window in which the items are visible
; in.
menu.window.margins.y = 12, 8
menu.window.visibleitems = 5
menu.boxcursor.visible = 1 ;Set to 0 to disable default cursor display
menu.boxcursor.coords = -58,-10,57,2
; These are the sounds for cursor movement
cursor.move.snd = 100,0
cursor.done.snd = 100,1
cancel.snd = 100,2

;----------------------------
;Title background definition
[TitleBGdef]
bgclearcolor = 0,0,0

[TitleBG 0]
type = parallax
spriteno = 5, 1
start = 0, 145
width = 400, 1200
yscalestart = 100
yscaledelta = 1
tile = 1,1
velocity = -1

[TitleBG 1]
type = normal
spriteno = 5, 2
start = -160, 145
trans = sub

[TitleBG 2]
type = normal
spriteno = 5,0
start = 0, 10
tile = 1,2
velocity = -1
mask = 0

[TitleBG 3]
type = normal
spriteno = 0,0
start = 0, 40
mask = 1
trans = add

;-------------------------------------------------------------------
;Character select definition
[Select Info]
fadein.time = 10
fadeout.time = 10
rows = 11
columns = 22
wrapping = 1 ;1 to let cursor wrap around
pos = 3,23 ;Position to draw to
showEmptyBoxes = 1
moveOverEmptyBoxes = 1
cell.size = 27,27 ;x,y size of each cell (in pixels)
cell.spacing = 2 ;space between each cell
cell.bg.spr = 150,0 ;Note: Don't use animation for cells
cell.random.spr = 151,0 ;Icon for random select (don't use animation)
cell.random.switchtime = 4;Time to wait before changing to another random portrait
p1.cursor.startcell = 0,0
p1.cursor.active.anim = 160
p1.cursor.done.anim = 161
p1.cursor.move.snd = 100,0
p1.cursor.done.snd = 100,1
p1.random.move.snd = 100,0
p2.cursor.startcell = 0,21
p2.cursor.active.anim = 170
p2.cursor.done.anim = 171
p2.cursor.blink = 1 ;1 to blink p2's cursor if overlapping p1's
p2.cursor.move.snd = 100,0
p2.cursor.done.snd = 100,1
p2.random.move.snd = 100,0
random.move.snd.cancel = 0;1 to have random move sound cancel itself when played repeatedly
stage.move.snd = 100,0
stage.done.snd = 100,1
cancel.snd = 100,2
portrait.offset = 0,0
portrait.scale = 1,1
title.offset = 319,13 ;Position of title (Arcade Mode, etc)
title.font = 3,0,0 ;Font of title (-1 for none)
;Big portraits
p1.face.offset = 1,340 ;Position to put big portrait
p1.face.scale = 1,1
p1.face.facing = 1
p2.face.offset = 639,340
p2.face.scale = 1,1
p2.face.facing = -1
;Name
p1.name.offset = 263,360 ;Position to put name
p1.name.font = 3,4,-1 ;Set to -1 for no display
p2.name.offset = 380,360
p2.name.font = 3,4,1
;Stage select
stage.pos = 320,450
stage.active.font = 3,0,0
stage.active2.font = 3,2,0 ;Second font color for blinking
stage.done.font = 3,0
;Team menu
teammenu.move.wrapping = 1
p1.teammenu.pos = 20, 360
;p1.teammenu.bg.spr =
p1.teammenu.selftitle.font = 3,0, 1
p1.teammenu.selftitle.text = Select team mode
p1.teammenu.enemytitle.font = 3,0, 1
p1.teammenu.enemytitle.text = Opponent team mode
p1.teammenu.move.snd = 100,0
p1.teammenu.value.snd = 100,0
p1.teammenu.done.snd = 100,1
p1.teammenu.item.offset = 0,20
p1.teammenu.item.spacing = 0,15
p1.teammenu.item.font = 3,0, 1
p1.teammenu.item.active.font = 3,3, 1
p1.teammenu.item.active2.font = 3,0, 1 ;Second font color for blinking
p1.teammenu.item.cursor.offset = -10, 0
;p1.teammenu.item.cursor.anim = 180; ?
p1.teammenu.item.cursor.spr = 180,0
p1.teammenu.value.icon.offset = 60,1
p1.teammenu.value.icon.spr = 181,0
p1.teammenu.value.empty.icon.offset = 60,1
p1.teammenu.value.empty.icon.spr = 182,0
p1.teammenu.value.spacing = 6,0
;p2 team
p2.teammenu.pos = 619, 360
;p2.teammenu.bg.spr =
p2.teammenu.selftitle.font = 3,0, -1
p2.teammenu.selftitle.text = Select team mode
p2.teammenu.enemytitle.font = 3,0, -1
p2.teammenu.enemytitle.text = Opponent team mode
p2.teammenu.move.snd = 100,0
p2.teammenu.value.snd = 100,0
p2.teammenu.done.snd = 100,1
p2.teammenu.item.offset = 0,20
p2.teammenu.item.spacing = 0,15
p2.teammenu.item.font = 3,0, -1
p2.teammenu.item.active.font = 3,1, -1
p2.teammenu.item.active2.font = 3,0, -1 ;Second font color for blinking
p2.teammenu.item.cursor.offset = 10, 0
;p2.teammenu.item.cursor.anim = 190; ?
p2.teammenu.item.cursor.spr = 190,0
p2.teammenu.value.icon.offset = -60,1
p2.teammenu.value.icon.spr = 191,0
p2.teammenu.value.empty.icon.offset = -60,1
p2.teammenu.value.empty.icon.spr = 192,0
p2.teammenu.value.spacing = -6,0
;Sounds

[Begin Action 160]
160,0, 0,0, 4,,AS192D64
160,0, 0,0, 4,,AS160D96
160,0, 0,0, 4,,AS128D128
160,0, 0,0, 4,,AS96D160
160,0, 0,0, 4,,AS128D128
160,0, 0,0, 4,,AS160D96

[Begin Action 161]
161,0, 0,0, 1,,AS128D128

[Begin Action 170]
170,0, 0,0, 4,,AS192D64
170,0, 0,0, 4,,AS160D96
170,0, 0,0, 4,,AS128D128
170,0, 0,0, 4,,AS96D160
170,0, 0,0, 4,,AS128D128
170,0, 0,0, 4,,AS160D96

[Begin Action 171]
171,0, 0,0, 1,,AS160D96

;-----------------------
;Character select screen background
[SelectBGdef]
;spr = graphics/selectbg.sff ;Filename of sprite data

[SelectBG 0] ;Scrolling background
type = normal
spriteno = 100,0
layerno = 0
start = 0,0
tile = 1,1
velocity = -1, -1

[SelectBG 1] ;Dark box
type = normal
spriteno = 100,1
layerno = 0
start = 0, 0
delta = 0,0
tile = 1,1
trans = sub
window = 1,21, 638,339
velocity = -1, 0

[SelectBG 2.A] ;Title background
type = normal
spriteno = 102,0
layerno = 0
start = 0, 2
delta = 0,0
tile = 1,0
trans = sub
velocity = -1, 0

[SelectBG 2.B] ;Title background B
type = normal
spriteno = 102,1
layerno = 0
start = 0, 2
delta = 0,0
tile = 1,0
trans = add
velocity = -3, 0

[SelectBG 2.C] ;Title background C
type = normal
spriteno = 102,2
layerno = 0
start = 0, 2
delta = 0,0
tile = 1,0
trans = add
velocity = -6, 0

;-------------------------------------------------------------------
[VS Screen]
time = 150 ;Time to show screen
fadein.time = 15
fadeout.time = 15
;Big portraits
p1.pos = 20,31
p1.facing = 1
p1.scale = 1,1
p2.pos = 299,31
p2.facing = -1
p2.scale = 1,1
;Names
p1.name.pos = 78,190
p1.name.font = 3,0,0
p2.name.pos = 241,190
p2.name.font = 3,0,0

;-----------------------
;VS Match up screen background
[VersusBGdef]

[VersusBG 1]
type = normal
spriteno = 100,0
start = 0,0
tile = 1,1
velocity = 0,1.5

[VersusBG 2] ;VS Screen
type = normal
spriteno = 100,1
start = 20,13
tile = 1,1
trans = sub
window = 19,30, 140,171
velocity = -2, 0

[VersusBG 3] ;VS Screen
type = normal
spriteno = 100,1
start = 20,13
tile = 1,1
trans = sub
window = 179,30, 300,171
velocity = 2, 0

[VersusBG 4] ;VS Logo
type = anim
actionno = 200
layerno = 1 ; Front
start = 0,95

[Begin Action 200]
200,4, 0,0, 1
200,3, 0,0, 2
200,2, 0,0, 3
200,1, 0,0, 4
200,0, 0,0, 8
200,5, 0,0, 3
200,6, 0,0, 3
200,7, 0,0, 3
200,8, 0,0, 3
200,0, 0,0, -1

;-------------------------------------------------------------------
;Demo mode definition
[Demo Mode]
enabled = 1 ;Set to 1 to enable demo mode, 0 to disable
select.enabled = 0 ;Set to 1 to display select screen, 0 to disable
vsscreen.enabled = 0 ;Set to 1 to display versus screen, 0 to disable
title.waittime = 600 ;Time to wait at title before starting demo mode
fight.endtime = 1500 ;Time to display the fight before returning to title
fight.playbgm = 0 ;Set to 1 to enable in-fight BGM, 0 to disable
fight.bars.display = 0 ;Set to 1 to display lifebar, 0 to disable
intro.waitcycles = 1 ;Cycles to wait before intro cutscene is played again
debuginfo = 0 ;Set to 0 to hide debugging info (debug mode only)

;-------------------------------------------------------------------
;Continue screen definition
[Continue Screen]
enabled = 1 ;Set to 1 to show continue screen, 0 to disable

;-------------------------------------------------------------------
;Game over screen definition
[Game Over Screen]
enabled = 0 ;Set to 1 to show game over screen, 0 to disable
storyboard = ;Game over storyboard filename

;-------------------------------------------------------------------
;Win screen definition
;This is the screen that is shown when you win in arcade mode.
;It will not be displayed if the winning character has an ending.
[Win Screen]
enabled = 1 ;Set to 1 to show win screen, 0 to disable
wintext.text = Congratulations!
wintext.font = 2,0,0
wintext.offset = 159,70
wintext.displaytime = -1
wintext.layerno = 2
fadein.time = 32
pose.time = 300
fadeout.time = 64

;-------------------------------------------------------------------
;Game ending screen definition
;This screen shows up after the Win Screen.
;It will not be displayed if the winning character has an ending.
[Default Ending]
enabled = 0 ;Set to 1 to show credits, 0 to disable
storyboard = ;Default ending storyboard filename

;-------------------------------------------------------------------
;Ending credits screen definition
;This screen shows up after the Win Screen and Ending
[End Credits]
enabled = 0 ;Set to 1 to show credits, 0 to disable
storyboard = ;Credits storyboard filename

;-------------------------------------------------------------------
;Survival mode results screen definition
;This is the screen that is shown when you win in survival mode.
;It will not be displayed if the winning character has an ending.
;Whole group is *2001.11.14 NEW*
[Survival Results Screen]
enabled = 1
winstext.text = Rounds survived: %i ;Use %i for win counter
winstext.font = 3,0,0
winstext.offset = 159,70
winstext.displaytime = -1
winstext.layerno = 2
fadein.time = 32
show.time = 300
fadeout.time = 64
roundstowin = 5 ;Number of rounds to get win pose (lose pose otherwise)

;-------------------------------------------------------------------
;Options screen definition
[Option Info]
cursor.move.snd = 100,0
cursor.done.snd = 100,1
cancel.snd = 100,2

;-------------------
;Options screen background
[OptionBGdef]

[OptionBG 1]
type = normal
spriteno = 100,0
start = 0,0
tile = 1,1
velocity = -1, -1